(China (Mainland))
Product Summary
Parametrics
?
Design the PCB pattern to minimize wiring length between opto-coupler and IPM’s input terminal, and also to minimize the
stray capacity between the input and output wirings of opto-coupler.
?
Connect low impedance capacitor between the Vcc and GND terminal of each fast switching opto-coupler.
?
Fast switching opto-couplers: tPLH , t PHL ≤ 0.8 μs, Use High CMR type.
?
Slow switching opto-coupler: CTR > 100%
?
Use 4 isolated control power supplies (V D ). Also, care should be taken to minimize the instantaneous voltage charge of the
power supply.
?
Make inductance of DC bus line as small as possible, and minimize surge voltage using snubber capacitor between P and N
terminal.
?
Use line noise filter capacitor (ex. 4.7nF) between each input AC line and ground to reject common-mode noise from AC line
and improve noise immunity of the system.
Features
FEATURE
a) Adopting new 5th generation IGBT (CSTBT) chip, which
performance is improved by 1μm fine rule process.
For example, typical V ce(sat)=1.9V @Tj=125°C
b) I adopt the over-temperature conservation by Tj detection of
CSTBT chip, and error output is possible from all each con-
servation upper and lower arm of IPM.
c) New small package
Reduce the package size by 10%, thickness by 22% from
S-DASH series.
?3 φ 50A, 1200V Current-sense IGBT type inverter
? Monolithic gate drive & protection logic
? Detection, protection & status indication circuits for, short-
circuit, over-temperature & under-voltage (P-Fo available
from upper arm devices)
? Acoustic noise-less 5.5kW/7.5kW class inverter application
? UL Recognized Yellow Card No.E80276(N)
File No.E80271
| Image | Part No | Mfg | Description |  |
Pricing (USD) |
Quantity | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
 PM50CLA120 |
|
MOD IPM L-SER 6PAC IPM 1200V 50A |
Data Sheet |
|
|
||||||||||||
| Image | Part No | Mfg | Description | |
Pricing (USD) |
Quantity | ||||||||||||
|
PM500 |
Other |
|
Data Sheet |
Negotiable |
|
||||||||||||
|
PM50100K |
Other |
|
Data Sheet |
Negotiable |
|
||||||||||||
|
PM50150 |
Other |
|
Data Sheet |
Negotiable |
|
||||||||||||
 |
PM5022-100M |
Bourns |
Power Inductors 10uH 20% |
Data Sheet |
Negotiable |
|
||||||||||||
|
PM5022-100M-RC |
J.W. Miller |
Power Inductors 10uH 20% |
Data Sheet |
|
|
||||||||||||
|
PM5022-101K-RC |
Bourns |
Power Inductors Pwr Inductor, Non-Shielded |
Data Sheet |
Negotiable |
|
||||||||||||
